High Precision Honing Steel Pipe for Hydraulic Cylinder by St52, Q345b

• Type: Seamless
• Technique: Cold Drawn and Honing
• Material: Alloy, Carbon Steel
• Surface Treatment: Bare Pipe
• Usage: Boiler Pipe, Hydraulic/Automobile Pipe, Machinery Industry, Chemical Industry, Special Purpose
• Section Shape: Round
• Model NO.: IR-B
• Size: 30mm~416mm
• Length: Fixed Length, by Random
• End Processing: Plain Ends
• Surface: Bare Pipe, Anti-Rust Painting
• Steel Material: St52, Q345b, 27simn, 15CrMo, 40cr, etc
• Transport Package: Standard Seaworthy Packing
• Specification: ASTM, DIN, GB/T
• Trademark: Iron&steel
• Origin: China
• HS Code: 73045910
• Production Capacity: 2000tons Per Month

Product Description

High precision honing pipe  can be produced according to the demands of costumers that the degree of precision can reach H8/H9. Burnishing and honing service can be provided depending on the roughness requirement of inner diameter.
The honing pipe is used for the hydraulic cylinder making.
Used as the pipes on the heated side of low and medium pressure boilers(normally with operating pressure not higher than 5.88Mpa and
operating temperature below 450 oc);as the pipes on the heated sides of high·pressure boilers,economizers,overheaters,reheaters and pipes
for petrochemical industry(with the operating pressure above 9.8Mpa and operating temperature ranging between 450~C~650~C



Specifications of major steel material:

Processing form	I.D.mm	Length	Straightness	I.D.tolerance	I.D.Roughness(RA)
Cold-rolled	30-100	≤12M	0.3-1.0/1000	H8-H10	0.4-1.6um
Cold-drawn	30-250	≤12M		H8-H10	0.8-1.6um
Hone	40-500	≤12M		H8-H9	0.4-0.8um
SRB	50-250	≤9M		H8	0.1-0.4um

 Tolerance of ID and WT
 

Size of inside Diameter(mm)	ID Tolerance			Tolerance of wall thickness
30	+0.0330	+0.0520	+0.0840	<120mm(OD)              ±5% >120mm up to 210mm±7.5% >210mm                     ±10%
>30-50	+0.0390	+0.0620	+0.1000
>50-80	+0.0460	+0.0740	+0.1200
>80-120	+0.0540	+0.0870	+0.1400
>120-180	+0.0630	+0.1000	+0.1600
>180-250	+0.0720	+0.1150	+0.1850
>250-315	+0.0810	+0.1300	+0.2100
>315-400	+0.0890	+0.1400	+0.2300

Length and cut tolerance
 
Length ≤ 500mm , +2mm
> 500mm ≤ 2000mm, +3mm
> 2000mm ≤ 5000mm, +5mm
> 2000mm ≤ 7000mm, +10mm
 
Standard:DIN 2391,EN10305
Material: St45,St52,E355
 
Chemical composition
 

Steel grade	Chemical composition,%
	C	Si	Mn	P	S	Cr
				≤
St45	0.17-0.24	0.17-0.37	0.35-0.65	0.035	0.035	0.250
ST52(E355)	≤0.22	≤0.55	≤1.6	0.025	0.025	0.25
SAE1026	0.22-0.28	0.15-0.35	0.60-0.90	0.040	0.050	/
27SiMn	0.24-0.32	1.10-1.40	1.10-1.40	0.035	0.035	0.300
20#	0.17-0.24	0.17-0.37	0.35-0.65	0.035	0.035	0.250

  
9. Mechanical Properties
 

Delivery condition	BK Cold finished(hard)		BKS Cold drawn and stress-relieved
Steel grade	Rm Mpa	Elongation A5(%)	Rm MPa	ReH MPa	Elonggation A5(%)
ST45	≥550	≥5	≥520	≥375	≥15
ST52(E355)	≥640	≥5	≥600	≥520	≥14
SAE1026	≥640	≥5	≥600	≥510	≥15
16Mn	≥640	≥5	≥600	≥520	≥14
20#	≥550	≥8	≥520	≥375	≥15

 
Tube ends
 
Tube ends shall be cut nominally square to the axis and free from burs
 
11.Delivery condition:BKS
Appearance
 
Tube shall have a smooth internal and external surface consistent with cold working  process, tube inner surface should be free from rust, scratches and other surface
irregularities.